Formulas for Token Calculator

The Token Calculator activity contains the following formulas. Browse the formulas by their categories using the right-hand menu.

Mathematics

Name	Format	Description
Absolute	ABS(number)	Returns the absolute value of number.
Addition	number1 + number2; date + number; number + date	Adds two numbers or a number and a date.
Average	AVG(number1, number2, ...)	Averages the input list, ignoring nonnumerical items.
AverageAnyway	AVERAGEA(value1, value2, ...)	Averages the input list, treating boolean TRUE as 1 and other nonnumerical items as 0.
Average If	AVERAGEIF([value1, value2, ...], condition)	Averages the items that satisfy the condition.
Ceiling	CEILING(number)	Returns the smallest integer that is greater than or equal to the input number.
Choose	CHOOSE(index, value1, value2, ...)	Chooses the item at the given index in the list.
ChooseAnyway	CHOOSEA(index, value1, value2, ...)	Expands array items as part of the list and chooses the item at the given index in the list. Multi-value tokens are treated as arrays. Example: CHOOSEA(5, 1, 3, [5, 6, 7]) returns 7.
CountAny	COUNTA(value1, value2, ...)	Counts items in the input list, including items in arrays and multi-value tokens.
Count If	COUNTIF([value1, value2, ...], condition)	Counts the number of items that satisfy condition.
Count Number	COUNT(item1, item2, ...)	Counts numerical items in the input list. Example: COUNT(2, "sit", "stand", 9) returns 2.
Count Unique	COUNTUNIQUE([value1, value2, ...])	Counts the distinct items in the input list.
Division	number1 / number2	Divides number1 by number2.
Even	EVEN(number)	Returns the closest even number to the input number.
Epoch	EPOCH(n)	Returns the datetime that is n seconds after the Unix epoch time.
Exponent	EXP(p)	Returns e^p.
Floor	FLOOR(number)	Returns the largest integer that is less than or equal to the input number.
Integer Division	number1 // number2	Divides the two numbers, dropping the fractional part.
Large	LARGE([number1, number2, ...], n)	Returns the nth largest item in the list of numbers.
Logarithm	LOG(number, base)	The power to which base must be raised to produce number.
Logarithm (base 10)	LOG10(number)	Logarithm with base 10.
LogarithmE	LN(number)	Logarithm with base e.
Maximum	MAX(number1, number2, ...)	Returns the maximum number in the list, ignoring nonnumerical items.
MaximumAnyway	MAXA(value1, value2, ...)	Returns the maximum number in the list, treating boolean TRUE as 1 and any other nonnumerical items as 0.
Median	MEDIAN(number1, number2, ...)	Returns the median value of the input list.
Minimum	MIN(number1, number2, ...)	Returns the smallest number in the input list, ignoring nonnumerical items.
MinimumAnyway	MINA(value1, value2, ...)	Returns the smallest number in the input list, treating boolean TRUE as 1 and any other nonnumerical items as 0.
Minus	-number	Inverts the sign of the input number.
Mode	MODE(number1, number2, ...)	Returns the most common item in the input list.
Mod	number1 # number2	Returns the remainder of number1 divided by number2.
Multiplication	number1 * number2	Multiplies two numbers.
Odd	ODD(number)	Returns the closest odd number to the input number.
Pi	PI()	Mathematical constant: The ratio of a circle's circumference to its diameter.
Power	x ^ y	Returns x raised to the yth power.
Product	PRODUCT(number1, number2, ...)	Returns the product of numbers in the list.
Quotient	QUOTIENT(number1, number2)	Divides two numbers, dropping the fractional part.
Round	ROUND(x) ROUND(x; n)	If only one argument is provided, rounds x to the nearest integer. If both x and n are provided, rounds x to n decimal places.
Round Down	ROUNDDOWN(x) ROUNDDOWN(x; n)	Rounds x down to the nearest integer if only one argument is provided. If both x and n are specified, rounds x down to the specified number of decimal places.
Round Mult	MROUND(number, multiple)	Rounds number to the nearest multiple of multiple. If there are two nearest multiples, MROUND rounds up.
Round Up	ROUNDUP(x) ROUNDUP(x; n)	Rounds x up to the nearest integer if only one argument is provided. If both x and n are specified, rounds x up to the specified number of decimal places.
Sign	SIGN(number)	Returns a number indicating the sign of the input number. For negative inputs, it returns -1; for zero-value inputs, 0; for positive inputs, 1.
Square Root	SQRT(number)	Returns the square root of the input number.
Subtraction	number1 - number2	Subtracts number2 from number1.
Sum If	SUMIF([number1, number2, ...], condition)	Sums the items that satisfy the provided condition.
Summation	SUM(number1, number2, ...)	Sums a list, ignoring nonnumerical items.
Truncate	TRUNC(number, n)	Truncates number to have only n decimal places. Unlike ROUNDDOWN and ROUNDUP, no rounding is carried out. For example, TRUNC(123.456, 2) returns 123.4. If n is negative, truncation occurs to the left of the decimal point. For example, TRUNC(123, -1) returns 120.

Boolean

Name	Format	Description
And	boolean1 && boolean2	Boolean "AND" operation on the input list. Use AND( , ) syntax for lists or multi-value tokens.
Equal	value1 = value2	Returns TRUE if value1 and value2 are equal, otherwise returns FALSE.
Greater Than	value1 > value2	Returns TRUE if value1 is greater than value2, otherwise returns FALSE.
Greater Than Or Equal	value1 >= value2	Returns TRUE if value1 is greater than or equal to value2, otherwise returns FALSE.
If	IF(condition, true_case, false_case)	If condition is true, returns true_case. Otherwise, false_case is returned.
Is Email	ISEMAIL(value)	Checks if the input item is a valid email string.
Is Even	ISEVEN(number)	Checks if the input item is an even number.
Is Not Text	ISNONTEXT(value)	Checks if the input item is not a string.
Is Number	ISNUMBER(value)	Checks if the input item is a number.
Is Odd	ISODD(number)	Checks if the input item is an odd number.
Less Than	value1 < value2	Returns TRUE if value1 is less than value2, otherwise returns FALSE.
Less Than Or Equal	value1 <= value2	Returns TRUE if value1 is less than or equal to value2, otherwise returns FALSE.
Not	!value1	Logical NOT; treats 0 as FALSE, other values as TRUE.
Not Equal	value1 <> value2	Returns TRUE if value1 and value2 are not equal, otherwise returns FALSE.
Or	boolean1 \|\| boolean2	Boolean "OR" operation on the input list. Use [OR( , )] syntax for lists or multi-value tokens.

Date

Note: The correct syntax for a date argument is "Date(year, month, day)." For example, if you want to enter April 15, 2017 in the workday formula, do not write "WORKDAY(4/15/2017, 4)." Instead, write "WORKDAY(DATE(2017, 4, 15), 4)" or, if you are using a date token, "WORKDAY(%(date), 4)."

Name	Format	Description
Add Month	ADD_MONTHS(date, number)	Returns the date that is number months after date. Supports fractional month numbers.
Date	Date(year, month, day)	Constructs a date value from the arguments.
Date Diff	DATEDIF(date1, date2, string)	Returns the difference between date1 and date2. string specifies the unit: "Y"/"y" for years, "M"/"m" for months, "D"/"d" for days.
Date Value	DATEVALUE(string)	Constructs a date from the input string.
Day	DAY(date)	Returns the day of the input date.
Days 360	DAYS360(date1, date2)	Returns the number of days between date1 and date2, assuming that a year is 360 days.
Epoch	EPOCH(n)	Returns the datetime that is n seconds after the Unix epoch time.
Hour	HOUR(date)	Returns the hour of the input datetime.
Minute	MINUTE(date)	Returns the minute of the input datetime.
Month	MONTH(date)	Returns the month of the input datetime.
Now	NOW()	Returns the current date and time.
Round Date	EDATE(date, number)	Returns a date that is date plus number months.
Round Month	EOMONTH(date, number)	Adds number months to date, then rounds the result to the last day of the month.
Second	SECOND(datetime)	Returns the second of the input datetime.
Time	TIME(hours, minutes, seconds)	Returns the input time as a fraction of the day.
Time Value	TIMEVALUE(string)	Returns the input time as a fraction of the day. Inputs can be in the form HH:MM, HH:MM:SS, or YYYY-MM-DD HH:MM:SS.
Today	TODAY()	Returns the current date.
Week Number	WEEKNUM(date)	Returns the week of the year that the input date falls in.
Work Date	WORKDAY(date, number)	Returns a date that is date plus number work days.
Work Days	NETWORKDAYS(date1, date2)	Returns the number of work days between date1 and date2.
Year	YEAR(date)	Returns the year of date.
Year Fraction	YEARFRAC(date1, date2) YEARFRAC(date1, date2, basis)	Calculates the difference between date1 and date2 in years, including fractions of years. Returns a positive value regardless of whether date1 or date2 is the later date. If date1 and date2 are the only arguments provided, the calculation assumes the US (NASD) 30/360 day count convention. Otherwise, year fractions are calculated depending on the value of basis as follows: basis=0: US (NASD) 30/360 day count convention basis=1: Actual/Actual day count convention basis=2: Actual/360 day count convention basis=3: Actual/365 day count convention basis=4: European 30/360 day count convention

String

Name	Format	Description
Char To Code	CODE(char)	Returns the ASCII code of the input character.
Code To Char	CHAR(number)	Converts the input ASCII code to a string.
Concatenate	string1 & string2	Concatenates the input strings.
Dollar	DOLLAR(number)	Returns the input number as a string representing a dollar amount. Prepends a dollar sign to the start of the string. Removes any negative sign from the number. If the number has more than two decimal places, rounds the number to two decimal places.
Exact	EXACT(value1, value2)	Determines whether the two inputs are identical strings.
Find	FIND(key, string)	Searches for key in the input string in a case-sensitive manner. Returns the first matched position or -1 if not found.
Fixed	FIXED(number)	Rounds the number to a specified number of decimal places and formats the result as text.
Join	JOIN(string_separator, [string1, string2, ...])	Joins the items of the string array with string_separator between them.
Left	LEFT(string, n)	Returns the n leftmost characters in the input string.
Lower	LOWER(string)	Returns a lowercase version of the string.
Mid	MID(string, n, length)	Returns length characters from string, starting at the nth character.
Number Value	NUMBERVALUE(string) NUMBERVALUE(string, decimal_separator, group_separator)	Parses the input string as a number. You can specify optional decimal point and group separators. If no separators are specified, Workflow assumes that you use periods for decimal points and commas to separate thousands. Percentages are also converted. For example, NUMBERVALUE("35%") returns 0.35.
Proper Text	PROPER(string)	Returns the input string with the first letter of each word converted to uppercase and the remaining letters converted to lowercase.
Repeat	REPT(string, number)	Returns the string repeated number times.
Replace	REPLACE(input_string, n, length, new_string)	Replaces part of input_string, starting from its nth character and going for length characters, with new_string.
Right	RIGHT(string, n)	Returns the n rightmost characters in the input string.
Roman	ROMAN(number)	Returns a Roman numeral string representing the input number.
Search	SEARCH(key, string)	Searches for key in the input string, returning the first matched position or -1 if not found.
Split	SPLIT(string, delimiter)	Splits the input string at each instance of the delimiter into an array.
String Length	LEN(string)	Returns the length of the input string.
Substitute	SUBSTITUTE(input_string, old_string, new_string)	Substitutes new_string for old_string in the input string.
Text	TEXT(value)	Returns a string version of the input value.
Trim	TRIM(string)	Removes leading and trailing spaces, and replaces all internal multiple spaces with a single space in the input string.
Upper	UPPER(string)	Returns an uppercase version of string.
Value	VALUE(string)	Converts the input string into a number.

Substituting Double Quotes